Measuring Pipe: PEEK-GF30
Gasket: EPDM
Housing: Cast Aluminum
Accuracy: ±1.5% of reading ±0.3% range
Repeatability: 1%
Minimum Conductivity: 50 µs/cm
Maximum Liquid Temperature:
90ºC (194°F)
Ambient Temperature: 5 to 70ºC
(41 to 158°F)
Maximum Pressure: 16 bar (232 psi)
Flow Indication: LED green, flow
proportional blinking
Frequency: Square wave signal NPN,
internal pull-up resistor 2 kΩ pulse duty
ratio 50:50
Signal Current Maximum: 20 mA,
current limited
Response Time: <500 mS
Electrical Connection: Plug connector
M12 x 1
Power Supply: 24 Vdc ±10%
Current Consumption:
Maximum 150 mA
Electrical Protection: Measures
short-circuit proof (up to 30V) and
polarity protection (up to -30V)
Protection Class: NEMA 4X (IP65)
Flow Range:
FMG71B: 0.5 to 30 LPM
(0.13 to 7.93 GPM)
FMG72B: 1 to 60 LPM
(0.26 to 15.85 GPM)
FMG73B: 5 to 250 LPM
(1.32 to 66 GPM)
Analog Output Signal (“-A” Models)
4 to 20 mA (0 to Full Scale):
Current Limitation: 26 mA approx.
Maximum Load: 250 Ω to GND