¡El Hager Contactor es de alta calidad!
Architecture
Type of order Not applicable
Number of poles 2 P
Main electrical features
Frequency 50 Hz
Rated operational voltage Ue 230 V
Voltage
Rated insulation voltage 250 V
Command voltage AC 230 V
Rated impulse withstand voltage 4 kV
Electric current
Acceptable current load with AC7 category A 25 A
Acceptable current load with AC7 category B 8,5 A
Thermal rated current outside of housings 25 A
Power
Inrush power absorbed 7,4 W
Operating consumption 1,8 W
Contact rating with 230 V in AC7 category A 4,6 kW
Contact rating with 230 V in AC7 category B 880 W
Power loss per contact 1,5 W
Total power loss under IN 2,1 W
Power dissipation per coil 0,6 W
Tripping
Time of response when closing 25 ms
Time of response when opening 15 ms
Resistance
Winding resistance 5500
Endurance
Electric endurance in number of cycles 30000
Number of mechanical operations 1000000
Dimensions
Depth of installed product 60 mm
Height of installed product 83 mm
Width of installed product 17,85 mm
Fluorescent bulbs control
Max. load fluorescent lamp 490 VA
Max. power with fluorescent parallel lamps 500 VA
Fluorescent lamps in duo circuit 990 VA
Incandescent bulbs control
Max. power with incandescent lamps 1100 W
Installation, mounting
Tightening torque 1,2Nm
Connection
Max cable connect. cross section (flexible) for control 1 to 6 mm?
Connection cross-section of the control cable solid 1 to 10 mm?
Connection cross-sect. rigid cable 1 / 10mm?
Connection cross-sect. flexible conductor 1 / 6mm?
Type of connection with screw
Number of contacts 2
Type of contacts 1NC+1NO
Equipment
Can be accessorized yes
Use
Local operation/hand operation no
Standards
European directive WEEE not concerned
Safety
Protection class isol.class II
Protection index IP 2
Use conditions
Storage temperature -40 to 80 degrees Celsius
Identification
Device family ESC