Engine Fuel consump. opt. Manufacturer mtu Model 16V2000G86F Type 4-cycle Arrangement 16V Displacement: l 35.7 Bore: mm 135 Stroke: mm 156 Compression ratio 17.5 Rated speed: rpm 1500 Engine governor ADEC (ECU 9) Speed regulation ± 0.25% Max power: kWm 1100 Mean effective pressure: bar 24.6 Air cleaner dry Fuel system Maximum fuel lift: m 5 Total fuel flow: l/min 30 Fuel consumption 2) l/hr g/kwh At 100% of power rating: 256 193 At 75% of power rating: 190 191 At 50% of power rating: 131 197 Lube oil system Total oil system capacity: l 102 Max. lube oil temperature (alarm): °C 103 Max. lube oil temperature (shutdown): °C 105 Min. lube oil pressure (alarm): bar 4.5 Min. lube oil pressure (shutdown): bar 4 Fuel consumption optimized Combustion air requirements Combustion air volume: m3/s 1.28 Max. air intake restriction: mbar 40 Cooling/radiator system TD Coolant flow rate (HT circuit): m3/hr 41.6 Coolant flow rate (LT circuit for TB): m3/hr 17.5 Heat radiated to charge air cooling (TB): kW 235 Input pressure customer radiator (TB): bar (rel.) 1.4 Max. pressure loss customer radiator (TB): bar 0.7 Heat dissipated by engine coolant: kW 425 Heat radiated to ambient: kW 40 Air flow required for mech. radiator (40°C) cooled unit: m3/min 1462 Air flow required for mech. radiator (50°C) cooled unit: m3/min 1462 Engine coolant capacity (without cooling equipment): l 70 Radiator coolant capacity (40°C): l 74 Radiator coolant capacity (50°C): l 106 Max. coolant temperature (warning): °C 102 Max. coolant temperature (shutdown): °C 105 Exhaust system Exhaust gas temp. (after turbocharger): °C 545 Exhaust gas volume: m3/s 3.45 Maximum allowable back pressure: mbar 50 Minimum allowable back pressure: mbar 30 Generator Protection class IP23 Insulation class H Voltage regulation (steady state) ± 0.25% Rado interference class N