¡El APW7067N integrates synchronous buck PWM and linear controller, as well as monitoring and protection functions into a single package. ¡El synchronous PWM controller drives dual N-channel MOSFETs, which provides one controlled power output with under-voltage and overcurrent protections. Linear controller drives an external N-channel MOSFET with under-voltage protection. ¡El APW7067N provides excellent regulation for output load variation. An internal 0.8V temperature-compensated reference voltage is designed to meet the requirement of low output voltage applications. ¡El switching frequency is adjustable from 150kHz to 1000kHz. ¡El APW7067N with excellent protection functions: POR, OCP and UVP. ¡El Power-On-Reset (POR) circuit can monitor VCC12 supply voltage exceeds its threshold voltage while the controller is running, and a built-in digital soft-start provides both outputs with controlled rising voltage. ¡El Over-Current Protection (OCP) monitors the output current by using the voltage drop across the lower MOSFET’s RDS(ON), comparing with internal VOCP (0.25V), eliminating the need for a current sensing resister. When the output current reaches the trip point, the controller will shutdown the IC directly, and latch the converter’s output. ¡El Under-Voltage Protection (UVP) monitors the voltages of FB and FBL pins for shortcircuit protection. When the VFB or VFBL is less than 50% of VREF, the controller will shutdown the IC directly.