Mejores selecciones
Festo Cilindro de aire DSNU-20-50-P-A-S2
$ 80 .77
(5) 1
Comentarios
Cantidad
MOQ : 4
Pagos
Maritime classification: See certificate
Stroke: 1 mm - 320 mm
Piston diameter: 20 mm
Type code: DSNU
Cushioning: Self-adjusting pneumatic end-position cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Conforms to standard: CETOP RP 52 P: ISO 6432
Design: Piston rod: Piston: Cylinder barrel
Position sensing: For proximity sensor
Variants: Constant, slow movement: Through piston rod: High corrosion protection: Internal thread on piston rod: With anti-twist protection: Extended piston rod: Piston rod with external thread shortened at one end: Heat-resistant seals max. 120Celsius Degree: Axial supply port: Extended external thread piston rod: With direct mounting: Transverse supply port: Piston rod at one end: Clamping unit on the piston rod: Low friction
Protection against torsion/guide: Square piston rod
Operating pressure: 1 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 0.2 J
Theoretical force at 6 bar, advancing: 158 N - 189 N
Type of mounting: With accessories
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Wrought aluminum alloy
Seals material: NBR: TPE-U(PU)
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: High-alloy stainless steel
Stroke: 1 mm - 320 mm
Piston diameter: 20 mm
Type code: DSNU
Cushioning: Self-adjusting pneumatic end-position cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Conforms to standard: CETOP RP 52 P: ISO 6432
Design: Piston rod: Piston: Cylinder barrel
Position sensing: For proximity sensor
Variants: Constant, slow movement: Through piston rod: High corrosion protection: Internal thread on piston rod: With anti-twist protection: Extended piston rod: Piston rod with external thread shortened at one end: Heat-resistant seals max. 120Celsius Degree: Axial supply port: Extended external thread piston rod: With direct mounting: Transverse supply port: Piston rod at one end: Clamping unit on the piston rod: Low friction
Protection against torsion/guide: Square piston rod
Operating pressure: 1 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 0.2 J
Theoretical force at 6 bar, advancing: 158 N - 189 N
Type of mounting: With accessories
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Wrought aluminum alloy
Seals material: NBR: TPE-U(PU)
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: High-alloy stainless steel
Las personas que compraron este artículo también vieron
Festo Cilindro de aire DFM-12-25-P-A-GF
US$279.62
KOGANEI Cilindro de aire BDAS6X15
US$79.00
Festo Cilindro de aire ADN-40-25-I-P-A
US$127.66
TPC Cilindro de aire NGQL80-25
US$347.31
AirTAC Cilindro de aire ACE20X15S
US$23.27
LS Mecapion Codificador S48-8-3600ZV
US$200.00
Johnson Controls Actuator M9206-GGC-2
US$495.38
Los clientes ven con frecuencia
Carel Válvula de expansión E6VB2ASV00
US$839.00
Mitsubishi Compresor RE277NRAMT
US$389.00
Togami Contactor CLK-25J3
US$79.00
SOG Sello de aceite TC27*37*10
US$4.62
Delta Ventilador KSB05105HB
US$15.38
APC Fuente de alimentación SURT192XLBP
US$2298.83
Schneider Contactor LC1D126F
US$173.08
Advantech PLC RIO-3315-B1E
US$3604.23
Publicaciones relacionadas recientes
-
02/17/2024
Método de cableado del relé PTC de nevera
El relé PTC (coeficiente de temperatura positivo) está conectado directamente en serie con el devanado secundario (devanado de arranque) y en paralelo con el devanado principal del motor.
-
08/08/2023
Método de cálculo del peso por metro de tubo de cobre para aire acondicionado
Método de cálculo del peso por metro de tubería de cobre para aire acondicionado.
-
01/08/2024
¿Por qué vibra el servomotor?
¿En qué casos vibrará un servomotor? ¿Qué pasa si el servomotor vibra? ¿Cómo podemos solucionar los problemas causados por la vibración? Este artículo explicará varias razones para esto.
-
08/08/2022
Motor de inducción de jaula de ardilla frente a motor de inducción de rotor bobinado: Estructura del rotor, ventajas e inconvenientes
El motor de inducción trifásico consta de dos partes básicas: el estator y el rotor. El estator es la parte fija del motor y se utiliza para generar un campo magnético giratorio.
-
03/10/2024
Todo lo que debe saber sobre el embrague magnético del compresor de CA del coche
Este artículo presenta los componentes del embrague magnético del compresor y su principio de funcionamiento, así como varios parámetros importantes. Además, también le brindamos algunas experiencias sobre cómo lidiar con la quema de los embragues del compresor del aire acondicionado.
-
11/18/2023
Transmisores Rosemount Series 1151, 2088, 2051, 3051CA, 3051S y sus diferencias
El transmisor de presión Rosemount es un tipo de transmisor de presión general. Está fabricado según la ley de inducción electromagnética y la norma JB/T9248-1999.
-
06/27/2023
Principio de funcionamiento del compresor frigorífico, esquema eléctrico, estructura
El componente principal del refrigerador es el compresor. Si un frigorífico no está equipado con un compresor de buena calidad y tecnología no puede ser un buen frigorífico.
-
05/19/2022
17 fabricantes de compresores centrífugos, en el mundo. ¿cuántos conoce?
En la última década, en un contexto de globalización económica y feroz competencia, la industria de fabricación de compresores centrífugos también ha experimentado continuas fusiones, adquisiciones y reorganizaciones.
-
07/29/2023
Compresor Scroll Vs. Compresor rotativo para CA
El compresor scrollue inventado en 1905 por el francés Copeland. Creó la compañía Copeland en los Estados Unidos, donde se utilizan principalmente acondicionadores de aire de agua
-
05/12/2022
Reparación de averías en servoaccionamientos Ultra3000
Hemos enumerado las fallas comunes y los métodos de reparación de los servovariadores Ultra3000; si necesita reemplazar el equipo, le brindamos Servoaccionamiento Allen Bradley Rockwell.