Stroke: 1 mm - 2250 mm
Piston diameter: 250 mm
Type code: DSBG
Cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Piston rod end: External thread
Design: Piston: Tie rod: Piston rod: Cylinder barrel
Position sensing: For proximity sensor
Variants: Spacer bolt on bearing cap end: Extended external thread piston rod: Extended piston rod: High corrosion protection: Spacer bolt on end cap end: Spacer bolts at both ends: Piston rod at one end: Heat-resistant seals max. 120Celsius Degree: Screwed-on swivel mounting position: Internal thread on piston rod: Variable spacer bolt length: Special thread on piston rod: For proximity sensor: Through piston rod: Shortened external piston rod external thread
Operating pressure: 0.6 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: c T4
ATEX category for dust: II 2D
Type of (ignition) protection for dust: c T120Celsius Degree
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 1 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Impact energy in the end positions: 2 J
Theoretical force at 6 bar, retracting: 28274 N
Theoretical force at 6 bar, advancing: 29452 N
Moving mass at 0 mm stroke: 9978 g
Additional weight per 10 mm stroke: 157 g
Basic weight with 0 mm stroke: 29313 g
Additional moving mass per 10 mm stroke: 384 g
Note on materials: RoHS-compliant
Cover material: Cast aluminum: Coated
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized