Stroke: 1 mm - 2800 mm
Piston diameter: 50 mm
Type code: DSBC
Cushioning: Self-adjusting pneumatic end-position cushioning: Elastic cushioning rings/pads at both ends: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Profile barrel: Piston rod: Piston
Position sensing: For proximity sensor
Variants: Piston rod at one end: Constant, slow movement: Through piston rod: With anti-twist protection: Low friction: Metal scraper: Hard scraper: Extended external thread piston rod: Internal thread on piston rod: Bellows on bearing cap: Temperature range 0 to + 150 Celsius Degree: Increased chemical resistance: End-position locking at both ends: Temperature range -40 to 80 Celsius Degree: End-position locking with piston rod retracted: Low friction for balancer applications: Extended piston rod: Sensor slots on 3 profile sides: Heat-resistant seals max. 120Celsius Degree: For unlubricated operation: End-position locking with piston rod extended: Clamping unit attached
Operating pressure: 0.1 bar - 12 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 22 (ATEX): Zone 21 (ATEX): Zone 1 (ATEX): Zone 2 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -40 to 150 Celsius Degree
Impact energy in the end positions: 1 J
Theoretical force at 6 bar, retracting: 990 N
Theoretical force at 6 bar, advancing: 990 N - 1178 N
Moving mass at 0 mm stroke: 365 g
Additional weight per 10 mm stroke: 56 g
Basic weight with 0 mm stroke: 1190 g
Additional moving mass per 10 mm stroke: 25 g
Type of mounting: With internal thread: With accessories: Optionally:
Pneumatic connection: G1/4
Note on materials: RoHS-compliant
Cover material: Coated: Die-cast aluminum
Seals material: TPE-U(PU)
Material of cylinder barrel: Wrought aluminum alloy: Smooth anodized