XW60K controller is a microcomputer control for medium or low temperature forced air cooling system device. It can be connected up to a maximum distance of 30 meters through a shielded cable with a size of 2×1mm2 Connect with remote operator panel T620, V620 or CX620 for remote operation and display. 4 relay outputs control compressor, evaporator fan, defrost (electric heat or hot air respectively) Defrost), lighting. Provides 4 NTC sensor inputs, the first for the control library temperature, the second circuit can be placed on the evaporator to control the defrost termination temperature and the evaporator of the fan Start and stop temperature, the third and fourth channels can be used to measure the condensation temperature alarm or used to display temperature at a certain point. 1 channel of digital input can define its function through parameters. ¡El parameter list can be uploaded or downloaded through the programming key (Hot Key) interface. in this interface By using the external communication converter XJ485CX to convert to ModBUS-RTU protocol, it can be to access the network of DIXELL's XWEB series monitoring system. ¡El controller provides a full-featured configurable parameter table system that the user can press through the keyboard. button for easy programming.