An electrode for wear resistance which has the following unique properties: 1. Complex Research Formulation. Magna 401 consists of a tough shock resistant ferritic matrix which has super hard crystals of quartz-like compounds, silicides and carbides. ¡El carbides and silicides are very fine and evenly dispersed throughout the deposit. This structure makes it possible for Magna 401 to withstand both impact and abrasion. ¡El tough matrix absorbs the shock while the fine carbides resist abrasion. The carbides and silicides precipitate spontaneously as the electrode is deposited. For a wide range of general purpose applications, this electrode outwears ordinary hard facing rods up to 4 to 1. 2. Super Weldability. Magna 401 can be deposited pass-over-pass without slag removal. ¡El slag has a light viscosity and it is not necessary for the welder to remove slag between passes. ¡El electrode is completely stable at low current settings and performs well on AC. Magna 401 can be applied in vertical and overhead positions. This is unique for a hard surface electrode since most are adaptable only to flat position welding. This feature makes it possible to overlay equipment in position without dismantling. There is no spatter, no porosity and slag is easily removed. Magna 401 can be cut with oxyacetylene torch when desired.