Equal percentage characteristics, which can be used for cold and hot water regulation and control
Waterway control of air conditioning system waterway control of heating system
technical parameter
medium
Cold and hot water, glycol solution with maximum concentration of 50%
Medium temperature
5..+100°C
Rated pressure
1600kPa
Flow characteristics
Equal percentage
Controllable ratio
Sv>100 .
leakage
... 01% kVs value (ANSI class IV)
(no leakage at delivery)
Valve pipe connection
Flange connection ISO 7005-2, PN16
Differential pressure △ Pmax
DN65... 125 350kPa (200KPa is low noise working pressure)
DN:100
Weigh:10.5kg <300kPa
Closing pressure △ PS
DN:65...125
700kPa
DN:150
300kPa
Rotation angle
90°
Installation position
Upward vertical or horizontal installation (refer to valve shaft)
maintain
Maintenance free
Valve material
valve body
Gray cast iron (polyester coating)
Valve ball
stainless steel
valve seat
RPTFE
Valve shaft
stainless steel
O-ring seal
EPDM
Port plate
stainless steel
Product features
working principle
¡El control ball valve is driven by the angular stroke actuator. ¡El actuator receives the standard regulating or three state floating-point signal and rotates the valve ball (throttling element) to the position indicated by the control signal.
Equal percentage characteristic
¡El built-in port plate ensures equal percentage flow characteristics