Stroke: 1 mm - 500 mm
Piston diameter: 32 mm
Type code: DSNU
Cushioning: Elastic cushioning rings/pads at both ends: Self-adjusting pneumatic end-position cushioning: Pneumatic cushioning, adjustable at both ends
Mounting position: Any
Design: Piston rod: Piston: Cylinder barrel
Position sensing: For proximity sensor
Variants: Heat-resistant seals max. 120Celsius Degree: Piston rod at one end: Low friction: High corrosion protection: Dust protection: Internal thread on piston rod: Axial supply port: Metal scraper: Extended piston rod: Through piston rod: With anti-twist protection: Transverse supply port: Constant, slow movement: Clamping unit on the piston rod: With direct mounting: Extended external thread piston rod: Special thread on piston rod: Piston rod with external thread shortened at one end
Protection against torsion/guide: Square piston rod
Operating pressure: 1 bar - 10 bar
Mode of operation: Double-acting
ATEX category gas: II 2G
Type of ignition protection for gas: Ex h IIC T4 Gb
ATEX category for dust: II 2D
Type of (ignition) protection for dust: Ex h IIIC T120Celsius Degree Db
Explosive ambient temperature: -20Celsius Degree <= Ta <= +60Celsius Degree
Explosion prevention and protection: Zone 1 (ATEX): Zone 21 (ATEX): Zone 2 (ATEX): Zone 22 (ATEX)
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity): as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC): 3 - High corrosion stress: 2 - Moderate corrosion stress
Ambient temperature: -20 to 120 Celsius Degree
Cushioning length: 14 mm
Theoretical force at 6 bar, retracting: 415 N
Theoretical force at 6 bar, advancing: 483 N
Moving mass at 0 mm stroke: 121 g
Additional weight per 10 mm stroke: 15.5 g
Basic weight with 0 mm stroke: 370.5 g
Additional moving mass per 10 mm stroke: 9 g
Type of mounting: With accessories
Pneumatic connection: G1/8
Note on materials: RoHS-compliant
Cover material: Wrought aluminum alloy
Seals material: TPE-U(PU): NBR
Piston rod material: High-alloy stainless steel
Material of cylinder barrel: High-alloy stainless steel